CyberPower Online S OLS10000ERT6UM Double Conversion Online UPS - 10 kVA - Single Phase - 3U Rack/Tower - 7 Hour Recharge - 4 Minute Stand-by - 230 V AC Input - 208 V AC, 220 V AC, 230 V AC, 240 V AC Output - 1 x Terminal Block - Serial Port
CyberPower OLS10000ERT6UM is a high-performance UPS featuring online double-conversion topology, which provides seamless pure sine wave power for mission-critical devices such as NAS and servers, DVRs/surveillance systems, transportation and infrastructure, and emergency systems. It's typically integrated in the back office, server room, and data center environment.
By manually setting the UPS to ECO Mode, the UPS automatically detects the input power quality and discerns whether it should operate in Line Mode or ECO Mode. Under poor power conditions, the UPS will run in Line Mode, which guarantees the highest level of protection and the best possible power quality. When the input power quality is acceptable, the UPS switches to ECO Mode, which increases the total output power efficiency by up to 96%.
The product is equipped with a Maintenance Bypass Switch. By flipping the switch, the power supply is safely transferred to utility. This allows service personnel to carry out fast on-site maintenance without having to shut down any connected equipment.
TYPICAL APPLICATION
Data Closets
NAS & Servers
Home Theater Systems
DVRs/Surveillance Systems
POS Systems
Transportation & Infrastructure
Vehicle/Yacht
Emergency Systems
Electric Lighting
Back Office
Server Room
Data Center
FEATURE FOCUS
Extended Runtime
Extended runtime is critical for most power demanding electronic devices. The installation of CyberPower's external battery modules allows scalable system runtime, guaranteeing higher system availability that ensures clean, uninterrupted power to protected equipment even during a power outage.
Smart Battery Management
Batteries are normally consider as a consumable item that requires replacement on a regular basis. To further prolong battery life span, UPS adopted with Smart Battery Management technology uses a 3-cycle approach and temperature compensation method which efficiently reduces battery maintenance cost and achieves a lower total cost of ownership.
Specifications:
Phase: Single Phase
Form Factor: Rackmount Tower
UPS Topology: Online Double Conversion
Energy Saving Technology: Online ECO Mode Efficiency > 96%
Parallel Expansion (Max. Units): 4
Generator Compatibility: Yes
Nominal Input Voltage ( Vac ): 230
Input Voltage Range ( Vac ): 110 - 276
Adjustable Voltage Range ( Vac ): 0-80% Load for 110 - 276 Vac | 0-100% Load for 176 - 276 Vac
Input Frequency ( Hz ): 50 ± 5 | 60 ± 6
Input Frequency Detection: Auto-sensing
Rated Input Current ( A ): 45.5
Input Power Factor: 0.99
Input Connector Type: Hardwire Terminal Block
Output Capacity (VA): 10000
Output Capacity (Watts): 9000
On Battery Waveform: Pure Sine Wave
On Battery Voltage(s) ( Vac ): 208 ± 1% | 220 ± 1% | 230 ± 1% | 240 ± 1%
Output Voltage Setting: Configurable
On Battery Frequency ( Hz ): 50 ± 0.1% | 60 ± 0.1%
Output Frequency Setting: Configurable
Power Factor: 0.9
ECO Mode Voltage Tolerance: ± 10 %
Overload Protection: Internal Current Limiting, Circuit Breaker, Fuse
Overload Protection (Line Mode): 105-125% Load for 10 min, 125-150% Load for 1 min, 150-170% Load for 10 sec, >170% Load for 1 sec
Overload Protection (Battery Mode): 105-125% Load for 2 min, 125-150% Load for 30 sec, >150% Load for 1 sec
Overload Protection (Bypass Mode): 125-150% Load for 1 min, 150-170% Load for 10 sec, >170% Load for 1 sec
Crest Factor: 3 : 1
Harmonic Distortion (Linear Load): THD?2%
Harmonic Distortion (Non-linear Load): THD?5%
Internal Bypass: Automatic Bypass | Manual Bypass
Typical Recharge Time ( Hours ): 7
Maximum Charging Current ( A ): 4
Start On Battery: Yes
Smart Battery Management (SBM): Yes
User-replaceable: No
Battery Type: Sealed Lead-acid
Compatible Extended Battery Module (EBM): BPSE240V75ART3UOA
Max. EBM Quantity ( pcs ): 15
Surge Suppression ( Joules ): 445
EMI/RFI Filtration: Yes
LCD Information Display: Operation Type, Power Status, Battery Status, Load Status, Fault & Warning, Other Information, Event & Log
LCD Setting & Control: Mode Setting, Alarm Setting, Input & Output, Battery Setting, Fault & Warning, Communication, Event & Log, Security Setting
LED Indicators: Line Mode, Battery Mode, Bypass Mode, UPS Fault
HID Compliant USB Port(s): 1
Dry Contact (with Relay): Optional
Emergency Power Off (EPO) Port: Yes
Audible Alarms: Battery Mode, Low Battery, Overload, Overcharge, Overheat, UPS Fault
SNMP/HTTP Remote Monitoring: Yes - with optional RMCARD205
Enclosure Construction: Metal
Rackmount Rail: Yes
Rackmount Ears: Yes
Installed Rack Height ( U ): 6
Certification: CE
RoHS: Yes
Product Warranty: 2 Years
Features:
Online (Double Conversion) UPS Topology
UPS Parallel Expansion
Overload Protection
Smart Battery Management (SBM)
Surge and Spike Protection
LCD Status Display
PowerPanel Management Software
Rack/Tower Convertible Configurations
ECO Mode
Generator Compatible
Zero Transfer Time
Extended Battery Module (EBM)
EMI and RFI Filtration
Emergency Power Off (EPO) Port
SNMP/HTTP Remote Management Capability